Our water recently froze and once we got it unfroze the washer started running fine then just before the rinse cycle it started flashing F then H and won't finish draning or spinning.
Is this a good question?
Rep: 102.5k
18
191
304
When a Kenmore washer displays the F/H error, it means the washer isn’t filling with water, possibly due to defective water supply valves, siphon problems or a frozen fill line. Check your lines are open and that there isnt some sort of other blockage or damage from the frozen water lines. Hope this helps
Was this answer helpful?
Past 24 Hours: 0
Past 7 Days: 2
Past 30 Days: 3
All Time: 212
