Rep: 25
2
3
How do I replace the tiny light bulb for the HAZARD LIGHT SWITCH on the dashboard? I know how to replace the bulb for the clock on the dashboard but how do I replace the bulb in the button on the dashboard that is used to turn on the HAZARD LIGHTS?
Thanks again.
Is this a good question?
Rep: 101.2k
8
172
358
@mconley ,I believe I posted how you were to change the clock bulb. From that video, remove the hazzard button / take it apart and change the bulb. Be adventurous, You can do it. Check the vids may help. Good luck.
I hope this helped you out, if so let me know by pressing the helpful button.
https://www.youtube.com/watch?v=gjSLqpHF...
Was this answer helpful?
Rep: 1.3k
6
4
Check out this YouTube video
Okay, sorry about the clock video.
I checked out this website and got a diagram for replacing the light to the hazard switch.
http://www.hondapartsnow.com/parts-list/...
It looks like there are 2 types of bulbs depending on the part you have (Part 11). You will have to take a look. Hope this helps!
Was this answer helpful?
Rep: 25
2
3
That should work for the CLOCK but NOT the HAZARD LIGHT (the triangle shaped red light on the dash to the left of the clock.
Thanks anyway.
Was this answer helpful?
Past 24 Hours: 0
Past 7 Days: 1
Past 30 Days: 4
All Time: 1,397
