Hi, I want to replace the broken digitizer LCD on my laptop without breaking it, is there a step-by-step link on doing this (it's a touchscreen) without ruining my laptop even more?
Is this a good question?
Rep: 101.2k
8
172
358
@luluconley , Louise, Screen disassembly video below of Toshiba P55, may not be your exact model, but hopefully will help in the replacement of your screen. Good luck.
I hope this helped you out, if so let me know by pressing the helpful button.
Was this answer helpful?
Rep: 30k
74
27
72
I'm not familiar with that particular laptop but most follow the same principles. Remove any screws around the bezel, usually under rubber screw caps, then prize off the bezel with a spudger or a thin but blunt knife. A few more screws must then be removed to free the LCD. Gently angle it forward in order to disconnect the cables. It's easier if you remove the screen from the laptop base, but that's a fair bit more work.
Was this answer helpful?
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 0
All Time: 65
