Soldering 9 wires in wireles headphones

Hi,

I bought Powerbeats 2 that as turned out have damaged cable. I opened them, desolder all the wire and I'm left with 9 of these.

How should I connect them?

CABLE/WIRES - https://postimg.org/image/9gzv7i5jb/

Block Image

BATTERY - https://postimg.org/image/zdtjk496v/

Block Image

BATTERY (connected after opening) - https://postimg.org/image/5zxt4j6h3/

Block Image

HEADPHONE - https://postimg.org/image/qlh6a6dfr/

Block Image

Answered! View the answer I have this problem too

Is this a good question?

Score 1
Add a comment

2 Answers

Chosen Solution

Here are the original wire locations:

Battery 1

Block Image

Battery 2

Block Image

Main Board 1

Block Image

Main Board 2

Block Image

Main Board 3

Block Image

Volume Board 1

Block Image

Volume Board 2

Block Image

Volume Board 3

Block Image

Volume Board 4

Block Image

Was this answer helpful?

Score 3

Comments:

Where's the main circuit board that the mic and volume controls are on that have the I wanna say 5 but possibly 6 different wires soldered to it!???

by

sorry for the delay Clint here is the image. the wire between the blue and yellow is black if you can't tell in the image. It appears to only be 5 wires soldered, the 6th solder pad appears to be unused.

by

Thank you so much, never would've gotten this soldered correctly without those, you're a life saver!

by

Add a comment

Thanks you so much.

But could you please help me to let me know the Cable in Right Speaker (while and red-green) connect with what color in the long cable.

Thanks you so much guys.

Was this answer helpful?

Score 0

Comments:

I posted the answer to this I believe right above, please take a look...thanks

by

Add a comment

Add your answer

Tomek Dorobisz will be eternally grateful.
View Statistics:

Past 24 Hours: 4

Past 7 Days: 18

Past 30 Days: 56

All Time: 398