Skip to main content

How do I reset the tv using a universal remote?

I have built in freeview and accidently changed it to analog channels and now cant change it back to freeview so i need to reset the tv using a total control universal remote?

Answered! View the answer I have this problem too

Is this a good question?

Score 1
Add a comment

3 Answers

Chosen Solution

Jodie, I am not familiar with your TV, so I did a search and this info. is all I found, hope it works for you.

Press and hold the (MENU) button on the side of the TV. The settings menu should appear. Continue to hold the menu button until this menu disappears.

TV should now go blank for a couple minutes, then revert to factory settings, and installation screen. Good luck.

I hope this helped you out, if so let me know by pressing the helpful button.

Was this answer helpful?

Score 2
Add a comment

I used one for all universal remote to reset my TCL smart TV. It depends on your TV model because the steps to reset for each model are different. What you can try is to press the reset button at the back of the TV to reset your device.

Was this answer helpful?

Score 0
Add a comment

If you are using some simple universal remotes like GE, just power recycling is enough. For this, remove the batteries from the compartment for a few minutes, then re-insert. You have to re-program again with the universal remote codes then.

Was this answer helpful?

Score 0
Add a comment

Add your answer

Jodie Seymour will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 15

All Time: 3,365