Hi there,
I have an iPhone 6s 64GB I purchased knowing the speaker and vibrate were not working, so I purchased parts and replaced them, but that has not solved the problem. Additionally I found the microphone wasn't working either.
I was wondering whether the last resort would be to replace the mother/logic board on the device, and if this would make any difference?
Thanks
Is this a good question?
Rep: 61
2
you definitely want to check first and foremost if it is water damage, does the charging port work? I would certainly find out and see if it is corroded or does it still look wet. It very well could be the logic board
Was this answer helpful?
Look for corrosion on the board, and take some isopropyl 90%+ alcohol and lightly brush the affected areas. Isopropyl helps evaporate corrosion on logic boards.
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 0
All Time: 343
1 Comment
Clean all connections and check for water damage on the logic board.
by Walker wallace