Fourth generation iPhone. Repair is straightforward, but the front glass and LCD must be replaced as a unit. GSM / 8, 16, or 32 GB capacity / Model A1332 / Black and White.

3197 Questions View all

How to install a dual SIM holder in I Phone 4?

Hello I found adual SIM holder on Dealextreme, How deep should I go in the dismantling steps to install this?

http://www.dealextreme.com/details.dx/sk...

Best regards

N.

Answer this question I have this problem too

Is this a good question?

Score 1

Comments:

This question was migrated from http://meta.ifixit.com/.

by

Add a comment

1 Answer

Most Helpful Answer

Step 13: iPhone 4 Teardown

you will need to also find somewhere to place the extra SIM holder inside the phones case, with minimal room, this could be difficult.

This will not be easy.

Alternatively, you could have the cable hanging out of your phone (which i assume is the way they have designed it?) shown here: http://www.iclarified.com/entry/index.ph...

you could tuck it into a phone case?

Was this answer helpful?

Score 1

Comments:

Yeah, often these are sold with specially-made cases. I'm sure how special those cases actually are :)

by

Add a comment

Add your answer

Norbert will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 1

All Time: 2,421