How to replace the broken jack 3.5?

Hello,

I need to replace the 4-pole jack of my headphones, someone you can 'tell how the cables should be connected?

I 1 green cable that connect to the tip of the jack, which is the left channel,

1 red cable to connect to the second ring of the jack which is the right channel,

I connect the ground wire to the fourth ring of the jack and the audio is ok.

He remains free, third ring of the jack but I remain 2 cables to the microphone, blue and white, how should I connect them?

Thank you!

Answered! View the answer I have this problem too

Is this a good question?

Score 0

Comments:

what is "sleeve 1 and sleeve 2"?

by

Add a comment

1 Answer

Chosen Solution

Hi,

try the following connections:

Green - tip

Red - ring

White - sleeve 1

Blue + Ground - sleeve 2

Block Image

Was this answer helpful?

Score 3

Comments:

Hi, Sleeve 1 and sleeve 2 are the designated names of the connecting rings 3 & 4 in a 4 ring jack connector. It goes tip, ring, sleeve 1, sleeve 2 In the image above Sleeve 1 = MIC+ and sleeve 2 = Ground.

by

Add a comment

Add your answer

Ivan will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 3

All Time: 75