Building a logic board
Is it possible to transfer all components from a broken logic board to a new bare board
Is this a good question?
Score
1
337449
1 Answer
Most Helpful Answer
Rep: 782.3k
1.1k
893
2.3k
@oofy in theory it would be, in practice no way. There are to many components and to many ways of how they are soldered. This would cost you more than a couple of phones. You'd have to have plenty of tools and plenty of pa\ractice to make this a success. Looking at your board, I'd suggest you bin this one and chalk it up as an experience.
Was this answer helpful?
Score
2
