Acer's Aspire V3 571G is a straight up and down mid-weight, budget laptop.

12 Questions View all

laptop work but blank screen

when i try to boot it up it starts but the screen stays blank what are the possible solutions??

Answer this question I have this problem too

Is this a good question?

Score 2

Comments:

Can you see any mouse or anything on the screen ?

It might be very dull so you might have to really look for it.

by

Hi,

Does the screen 'light up' or stay black? If it stays 'black' try shining a torch at an angle close to the screen and see if you can see the desktop display once it has booted up. If so it could be a backlighting problem.

Try connecting an external monitor and see if there is a display on it when you boot up.

by

Add a comment

3 Answers

Most Helpful Answer

@tetzel , johann, Try hooking up an external monitor, if external monitor works probable laptop display issue, corrupt driver, bad connection on ribbon cable, bad display. If external monitor not working could be graphics card issue. Below link tells how to hook up external monitor to help trouble shoot your laptop, the 3rd link and other Acer forums on the net, addressing Blank/black screen talk about the Bios becomes corrupt and needing addressed. Good luck.

I hope this helped you out, if so let me know by pressing the helpful button.

http://www.yumapk.com/how-to-connect-ace...

http://community.acer.com/t5/Legacy-Lapt...

http://www.tomsguide.com/answers/id-2221...

Was this answer helpful?

Score 4
Add a comment

Take out the battery. Press power button for a minute. Then put battery back in again and power up. Repeat couple of times if necessary.

Was this answer helpful?

Score 2
Add a comment

Possible that your memory needs to be re-seated

Was this answer helpful?

Score 1
Add a comment

Add your answer

johann bayzil will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 7

Past 30 Days: 42

All Time: 526