iMac Intel 27" EMC 2309 (Late 2009, Core 2 Duo 3.06 or 3.33 GHz) ID iMac10,1, EMC 2374 (Late 2009, Core i5 2.66 GHz or Core i7 2.8 GHz) ID iMac11,1

384 Questions View all

screen goes black but I can see with a flash light.

iMac Late 2009 EMC 2374 SN W89524BB5PJ

Hey everybody.

I have this iMac late 2009 and the screen starts to go black a few days ago, I did a SMC/PVRAM Reset, but this did not solve the problem.

So i started to investigate and try to point a flash light to the screen and saw that it was working but almost without brightness, what do i need to do in order to repair it?

Note: I also read that if you lower the brightness it will stay on. it worked!

THank you

Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment

1 Answer

Chosen Solution

I would pull the LED driver board and go over iy will a soldering iron trying to locate any cold solder joints :

iMac Intel 27" EMC 2309 and 2374 LED Driver Board Replacement

Here's how to try to spot one:

Here's how to repair one:

Was this answer helpful?

Score 1
Add a comment

Add your answer

cocoabraham will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 54