Fix Your Stuff Community Store

Repair information for the 4th generation iPad. Released November 2, 2012. Model numbers: A1458, A1459, and A1460.

408 Questions View all

Options

ipad wont charge even after replacing charging port

Ok so a customer brought in a iPad 4th Generation with a broken charging port. The story was the lightening cable broke off in the port and the customer dug it out using a pick or something and the port was destroyed. I have put 4 different charging ports in it and they all do the same thing, when you plug the cable in the iPad will turn on but wont show its charging at all, no lighting bolt through battery, Ive also tried powering it off to see if it would charge while off and still wont. I am using the OEM Apple iPad charger and lightening cable. not sure what else could be going on.

Answered! View the answer I have this problem too

Is this a good question?

Yes No
Score 0
Add a comment

1 Answer

Filter by:
Most Helpful Newest Oldest
Chosen Solution

Options

Hi Chad

Possibly an issue related to U2 charging IC. (chip 1608A1)

Not sure but it is the most probable cause.

Normaly your ipad should turn on until the battery is fully depleted. Once done, you won't be anymore to turn it on.

What happens when you plug the Ipad to your computer? is it seen by Itune?

Was this answer helpful?

Yes No
Score 1
Add a comment

Add your answer

Chad Coffman will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 1

All Time: 156