CDMA version of the fourth generation iPhone. Repair is straightforward, but the front glass and LCD must be replaced as a unit. 16 or 32 GB / Model A1349 / CDMA compatibility.

415 Questions View all

My back glass panel will not slide back on?

I just finished replacing the display assembly on an iphone 4 CDMA. I followed the online guide to a "T". But as I put it back together, i got down to the battery and the back glass wont slide back on. It will if the battery isnt in the phone. But if it is, the back glass panel wont slide properly. Only one side will.

Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment

1 Answer

Chosen Solution

I've always had a problem with those. I put the back cover on, just above the rim, over the bottom end of the phone. Then I usually have to muscle it in, then put the screws. It is possible that your battery, or maybe even the connector plate, isn't sitting flush? Check those things and see if you can't get it to slide down

Was this answer helpful?

Score 3

Comments:

Thanks a lot!!!

by

Add a comment

Add your answer

john lonon will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 35