Second generation of CDMA iPad 2 with 16, 32, or 64 GB and Dual Core A5 Processor. Model Number A1397. Repair is detailed and requires heat and prying.

60 Questions View all

Digitizer cable installation after replacing LCD

How do you know if the digitizer cable is installed properly and not creased or pinched when reinstalled or replaced? I have replaced the LCD with minor issues but get the 24 million minutes retry message once the iPad is powered on. I have tried to reinstall the cable back to the original positioning in the diagrams but still seem to have a fold in it between the digitizer and the LCD.

Answer this question I have this problem too

Is this a good question?

Score 0
Add a comment
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12

1 Answer

Most Helpful Answer

24 million minutes retry message is usually solved when you have iPad connected via 3G or Wi-Fi with date and time set automatically. Hopefully you have set it up to set date/time automatically with internet. If not you will most likely need to restore the system software (iOS) on the iPad 2.

I wouldn't touch the digitizer cable if it appears to be working fine.

Was this answer helpful?

Score 1
Add a comment

Add your answer

lvandawalker will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 33