I took the memory card out of my camera and when I reinstalled it the camera will not start. The battery is fully charged. I have tried the memory card in another camera so this is working OK. I have tried a different memory card in my camera put it still will not power up. Any ideas?
Is this a good question?
Rep: 7.9k
10
31
15
Check that the battery / memory card cover closes correctly. If the cover is not fully closed, the camera will not power up.
If you're positively sure that the cover is completely closed and the camera still will not power up, the sensor switch that signals whether the cover is open or closed might be defective, and you should take the camera to a repair shop to have it checked.
Was this answer helpful?
Past 24 Hours: 0
Past 7 Days: 6
Past 30 Days: 6
All Time: 555
