Doesnt do anything when trigger is pulled
Drill does not do anything when plugged in, I would like to replace all of the inside parts but don't know where to get them.
Is this a good question?
live4jesus6 use this guide and test the power cord as well as the trigger switch to see if it has power. If you have never done that, let us know. I wouldn't want you to get zapped by the 110V . If it does have power and if the trigger works, move on to this guide and check the motor winding as well as the brushes.
Was this answer helpful?
Past 24 Hours: 0
Past 7 Days: 9
Past 30 Days: 28
All Time: 233