I have an hp photosmart 3210 all in one printer that has an error code 0xc18a0106 Which I think is something to do with the print cartridges being out of date but they are all new. But upon looking inside the printer I see there is smattering of ink dried every where that leads me to the idea that the ink distribution system is clogged up. My question is how to disassemble the system to clean it?
Is this a good question?
Rep: 451.8k
11
367
1.4k
Hi,
Before you go to all the trouble of dis-assembly, you may wish to try and see if any of the solutions offered by this link resolves your problem.
Was this answer helpful?
Rep: 61
2
1
As written in Hp Photosmart 3210 Manual the this error code is simply fixed by reset. To reset the printer: 1- Unplug the USB cable from the printer.
2- Press the On/Off button to turn off the printer, unplug the power lead from the printer, press and hold both the "OK" button and the "HELP" button, then plug in the power lead, wait a few seconds and release the two buttons, then press the "On" button
Was this answer helpful?
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 1
All Time: 471
