Fix Your Stuff Community Store

Repair information and guides for the iPhone 6 that was released on September 19, 2014. Model Numbers: A1549, A1586, and A1589

4994 Questions View all
Question Closed

Options

Dead screen after repair

Hi I replaced charging flex cable and went to connected my screen to make a call to ensure that the mic was working (it was working). I honestly can't remember if I turned the phone off before I disconnected the screen. Took screen off to place all the screws back. All screw were put back in correct location. Then connected screen and turned it on, Apple icon came up and then disappear. Then Back light was lit for a little bit but then it went dead. No light coming on at all. Phone was previous water damage and left some smudge marks on screen, but everything except, mic( which was fixed with replacement) & home button didn't work (ID touch worked). Is that a backlight issue or lcd? Plugged phone with cable, just keep hearing a dong noise every 2 seconds. What am I supposed to do? Do I replace the whole front panel or just the backlight?

Answer this question I have this problem too

Is this a good question?

Yes No
Score 0
Add a comment

1 Answer

Filter by:
Most Helpful Newest Oldest
Most Helpful Answer

Options

Not sure if it can help but usually, when an iPhone has a screen problem, he keeps vibrating or making a noise every 2-3 seconds, it stands for ¨my screen has a problem! my screen has a problem!¨

Was this answer helpful?

Yes No
Score 1

1 Comment:

Thanks, found that out on a Google thread, have a new screen arriving, hopefully that's the only problem. Would hate it if the connectors are bad and need replacing. Fingers cross!

by

Add a comment
View Statistics:

Past 24 Hours: 1

Past 7 Days: 2

Past 30 Days: 2

All Time: 130