Released on September 19, 2014, this 4.7" screen iPhone is the smaller version of the iPhone 6 Plus. Identifiable by the model numbers A1549, A1586, and A1589.

4429 Questions View all

Microphone on Front Camera/Sensor lacks adhesive. What to do?

The replacement Front Camera and Sensor cable I received from iFixit is lacking any adhesive tape on the microphone. I am trying to install this replacement component onto a new Front Panel that also lacks any adhesive at the spot the microphone is supposed to mount. How do I apply an adhesive to complete this first step of the reassembly process?

Thank you,

Grant Frazier

Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12

2 Answers

Chosen Solution

I keep a few different kinds of adhesive on stock, for different repair purposes.

3M Double-Sided Adhesive Tape - 2 mm Width

This is what I use for general purpose things, for phones

3M Double-Sided Adhesive Tape - 2 mm Width Image

Product

3M Double-Sided Adhesive Tape - 2 mm Width

$9.99

Was this answer helpful?

Score 1
Add a comment

Make sure you don't put any tape over the hole for your microphone, if you end of covering up this hole your Siri will not work.

Was this answer helpful?

Score 0

Comments:

He's right. You need to be mindful of that area

by

Add a comment

Add your answer

Grant Frazier will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 80