hi , i Have replaced my broken d802 screen with new full assembly ,easy job , done it right but the touch after replacement was non responsive ... so i tought , whole assembly is faulty , i ordered a new one ... placed the new one up , and i have the same problem , LCD works fine but the , Touch is non responsive
...what could be done so i can fix this ?
Is this a good question?
Rep: 751
6
2
Hi there, You may of possibly damaged the connecter on the motherboard that it plugs into. Check for any bent pins and if there are any softly push them back into alignment with a credit card or something sturdy and plastic.
Good Luck
Was this answer helpful?
i tried , didnt see any faulty pins , so eather im blind or something but im preety much sure pins are oke ... the problem i am facing now is that i dont even have the voltage on the screen ...its all black , but the notification light and the back LED lights are flashing so i assume it must be something with the motherbord or the lower dock bord ... both lcds act in the same fashion. :S
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 0
All Time: 463
