Is the iPhone 6 64gb model thicker than a 16gb? I recently did a color conversion housing on my 64gb and the screen doesn't want to sit down all the way. The screen isn't popping out but it could definitely go in more. Please let me know your thoughts and input.
Jon
Is this a good question?
Rep: 783.7k
1.1k
894
2.3k
Rep: 43
3
1
I had this issue before it's the aftermarket parts but there is a solution that I do that really helps. Get a food saver vacuum sealer from Walmart. Put some crazy glue around the edges inside the new housing just a little you don't want it to run pop the screen in but don't screw it in. Put the phone in a vacuum sealed bag and let it sit for about 5 minutes. That will give you an amazing finish it forces the screen lower than you can ever get it yourself and the glue keeps it there. I have not had a problem removin the screen after either it's just a little harder.
Was this answer helpful?
Past 24 Hours: 1
Past 7 Days: 1
Past 30 Days: 2
All Time: 92
1 Comment
It's more likely than not, that it's the aftermarket housing. Using these parts, is kinda like playing horse shoes. If you're close. That's about the best you're gonna get
by iMedic