The Samsung Galaxy S6 Edge+ is the larger variant of the Galaxy S6 Edge.

56 Questions View all

custom binary blocked by frp lock

?????? i cant used

i traid factori reset but not word

fashit the batery

the cellular said (keanel is not seandroid enfoacing custom binary blocked by frp lock

Answered! View the answer I have this problem too

Is this a good question?

Score 35

Comments:

I have this promblem too it has a warning sign and says custom binary blocked by frp lock and no matter what I do it wont leave that page. it started when I rooted my phone, when I rooted it, the phone shut off then did the warning screen. PLEASE HELP FIX

by

I got the same problem with my G S6 edge. I have been up for countless hours over a week searching for a fix. Were you able to resolve your issue?

by

any link please for this solution....

by

Add a comment

3 Answers

Chosen Solution

For phones that say custom binary blocked by FRP lock after root / flashing modified binaries:

You need to put the phone into download mode by keep holding power + volume down and home until you get the light blue screen then enter download mode.

Then you flash matching Samsung firmware on there. Either 6.x or 7.x using downloaded firmware from either updato or sammobile website.

After that you may also need to do a factory reset in recovery mode as well if it still does not boot.

Once it boots go through setup and enter linked google account login as prompted.

Now to bypass FRP lock you use the instructions on this thread:

http://forum.gsmhosting.com/vbb/f777/uni...

Make sure you downgrade from 7.0 to 6.0 if you are on Nougat first before doing the frp bypass trick.

You also need 6.0 android google account APK so that frpbypass rootjunkie APK works.

Do some research if you can't work it out.

Was this answer helpful?

Score 2

Comments:

After blue screen my phone screen showing:

Downloading.....

Donot turn off target

Now what I have to do?

by

Use Odin software to flash the Samsung firmware onto the phone.

Guide here:

http://updato.com/how-to/how-to-install-...

by

Add a comment

Flash original firmware in odin. Boot up device. Enable developer settings. Select OEM option, enable. Now you can flash custom firmware without tripping the security.

Was this answer helpful?

Score 3

Comments:

Where do I get the original firmware?

by

After blue screen my phone screen showing:

Downloading.....

Donot turn off target

Now what I have to do?

by

Add a comment

Hi,

you should use Samsung Smart Switch "emergency recovery feature" and it will work fine again. You'll lose all your data but the device will work again

Was this answer helpful?

Score 0

Comments:

i tried it doesnt works for me

by

perhaps Samsung has changed something within this process. TRY to send it in as a warranty issue.

by

Add a comment

Add your answer

Angel Charriez will be eternally grateful.
View Statistics:

Past 24 Hours: 33

Past 7 Days: 285

Past 30 Days: 962

All Time: 23,285