Right side of the headphone is not working..!
Both the phase and ground wires are at the correct position and soldered well...but its not working..why..?
Is this a good question?
Score
2
255022
1 Answer
Rep: 782.4k
1.1k
893
2.3k
Dino Ram, you must do a continuity test from the jack to the driver. If that checks out ok, you may have a bad driver (speaker). If it does not then it is possible that this is caused by a bad jack (connection).
Was this answer helpful?
Score
0
Any other cases
Yes ever wire is properly soldered
by abhiom27