The first model of iPhone, Model A1203 with 4, 8, or 16 GB capacity and an aluminum back. Repair requires a significant amount of prying, and may require some soldering.

283 Questions View all

break front glass replace

replace of front glass

Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment

2 Answers

Chosen Solution

it's possible, but it's a tough job.

ifixit has no guide for that - but when i look at the videos on youtube - i understand why most people should not try that


Was this answer helpful?

Score 1
Add a comment

although only the glass was broken on my iphone 2g it proved far too hard to try and pry it from the digitiser. as a result of my experience i wouldn't recommend it ! i replaced the digitiser and glass as one piece which was far the guide here says it's very difficult, particularly getting the back cover off. youtube has plenty of guides as markus has shown-watch a few they've got a couple of handy tips.

Was this answer helpful?

Score 0
Add a comment

Add your answer

prasad will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 1,530