HP Part#: CN731A#B1H: Printer, scanner, copier, web browser with wireless internet capability

19 Questions View all

After reassembling, printer won't turn on

After following the HP Photosmart D110a Scanner Glass Replacement tutorial and reassembling, the printer won't turn on.

All wires were reconnected and the power button face was reinserted.

I was not grounded when I disassembled the printer.

Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment

1 Answer

Chosen Solution

Disassemble the printer as you did when replacing the glass, there is a small cable that you need to make sure is connected properly. Recheck all flex cables. Being grounded will not short the printer out. Test outlet also with a lamp, be sure outlet works.

Matthew Lucas

Was this answer helpful?

Score 1

Comments:

Rechecked flex cables and tried a different outlet. Printer powers on again.

by

Add a comment

Add your answer

micjobe will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 2

All Time: 80