Model MD2614u / AMD Turion X2-64 2.1GHz dual-core processor

19 Questions View all

Broken part where power cord inserts

The plastic housing that holds the peg that the power cord plugs into is broken. Is there a way to replace it? There is a thick wire that comes out the back of the plastic and looks like it should insert into an opening on the board below it. This wire is also disconnected.

Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment

2 Answers

Chosen Solution

after reading you question several times i would have to say maybe. The best thing for this would be to have someone that know electronics look at to see what is going on.

Was this answer helpful?

Score -1
Add a comment
Most Helpful Answer

Kate DeCleene, the jack itself is actually soldered onto the board. About the thick wire, it would help if you post a couple of images of the damage etc. with your question. That way we can see what you are referring to. Use this guide for that.

Was this answer helpful?

Score 1
Add a comment

Add your answer

Kate DeCleene will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 49