Fix Your Stuff Community Store

Repair information and guides for the Apple iPhone 5c that was announced on September 10, 2013. Model: A1532, A1456

1233 Questions View all

Options

iPhone 5C no graphics output

I have an question. I got an iPhone 5c witch i repaired but there is no graphical output (it has backlight) i tested 5 different screens on there. 4 where cracked but i got those screens for FREE at my local repair shop because its an good friend with my dad. I also got one good one but even that doesn't work. It turns on and with my camera i can see the proximity sensor working but no graphical output at al. Touch doesn't work either on all screens.

So is there an component missing on the logic board?

And if the battery is flat, and it gets charged, it turns on WITHOUT backlight and makes an continues "boing" sound if you charge it and gets pretty hot. but when i reboot it by reconnecting the battery, it boots up WITH backlight and it doesn't make a continuous charging sound/vibration. It also gets hot if it turns on without backlight on or without screen. My PC and iTunes can see the device, i restored it. No success. Are there components missing? If so, witch one is related to "graphics"?

IT ISN'T WATER DAMAGED :D

I used this iPhone for gaming and for my Xbox (smartglass) to challange some N00BS @ BLACK OPS 2 but now its broken but i'am using my iPad so no probs but its an expensive toy so PLEASE HALP!!!!!!!1

Thanks :D

Sent from my iPad

Answer this question I have this problem too

Is this a good question?

Yes No
Score -1
Add a comment

1 Answer

Filter by:
Most Helpful Newest Oldest
Most Helpful Answer

Options

I have seen this before its one of two things, bad connection on the board or a screen it doesn't like

I had to put on some serious magnification lenses and look at the connections on the board for the LCD, found on of the connections had been damaged, i suppose from trying to force a connection to get in place, i used some of the ifixit needle tweezers the ones that come to the sharp point and actually messed with the connection on the board and double checked the connector for the LCD ribbon, made sure that all were close to what they are supposed to look like and not "smooshed" re-seated the connection and tested it and it came on and still is working for the customer today, this was a repair that he had attempted and ended up damaging the connection on the board, this might be the case

Other than that i have had plenty of just bad screens that this phone didn't like and FINALLY when i found one it was ok with it worked fine so its really either double check the connection to make sure they are not damaged or trial and error with the new screens

Was this answer helpful?

Yes No
Score 1

2 Comments:

Thanks for your help. However i already inspected it. I thing a cap is bad cuz those screens are know good. We tested these screens on his test iPhone 5c and it worked. And atleast one has to work from those 5 screens. One is brand new. But these are tested I witnessed it. I hope this logic board is bad cuz i ordered an other one but i can make som pics of both connections tomorrow!

However thanks for your help man:)

by

no problem! I'm sure when you get the new logic board in that it will work fine

by

Add a comment

Add your answer

Lorenzo van het Hul will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 160