Rep: 23
1
Well I've done it all. Even installed a brand new switch. It worked perfect the first 3 times. The Blankety Blank thing is at it again. We paid 42.00 dollars for a new switch. Now it is doing the same thing. Sometimes I wish we never had to depend on modern convenience then we would not know what we are missing when it all of a sudden won't work. If anyone has an idea let me know?
Is this a good question?
Rep: 43
2
Try this. Remove the top cover of the washer. To remove the top cover, my washer had 3 screws on the back. Once the cover has been removed, you should see the Central Control Unit (CCU). Simply give the far right terminal a little push inwards and that should to the trick. I believe the far right terminal controls the front door latch ( F DL ). If not, give all the terminals to the left a little push. I'm guessing vibration from the washer causes the terminal to shake loose which results in the F DL error code. I hope this helps.
Was this answer helpful?
Past 24 Hours: 0
Past 7 Days: 2
Past 30 Days: 2
All Time: 116
1 Comment
My honey checked all the connections at the control panel. Found 1 of them a little loose but pulled each one off and put it back on. It has not quit yet. Gone through at least 8 loads now.
by an angry mom