Second generation of iPhone. Model A1241 / 8 or 16 GB capacity / black or white plastic back. Repair is more straightforward than the first iPhone. requires screwdrivers, prying, and suction tools.

1500 Questions View all

iPhone wont turn on after Glass replacement

I recently replaced my glass screen but when i turned it on the home button wouldnt work. So I opened it again while it was still turned on to see if the button looked ok but when I did this no. 1 wire popped of and the phone turned off. But now it wont turn on again even when i connect it to the computer nothing happens.

I decided to replace the home button so that i could hold the power button and home button to reset it. But still nothing happens.

Could some please help me to get my phone to turn back on?



Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12

1 Answer

Chosen Solution

You are going to need to hard reset the phone. The easiest way to do this is to hold the home button and the Sleep/Wake button simultaneously until the phone restarts. Hold on for dear life until you get the the Apple Logo it should take about 20 seconds. The hardware (pun intended) way to do this is to separate the logic board and the battery for at least 5 seconds. You can achieve that by following this guide until Step 14.

Was this answer helpful?

Score 0
Add a comment

Add your answer

jamesferguson will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 2,344