Skip to main content

Sony’s 18.2 megapixel camera meant for general photo taking, 3D images, and filming. Model number: DSC-WX100.

7 Questions View all
Question Closed

How to repair an offset frame?

After I made a component replacement in my camera, and upon trying to reassemble the camera, the frame of the camera is not fitting correctly. When trying to insert a screw inside of the HDMI port, the frame was offset enough to the point where a stress fracture was visible on the frame.

Answer this question I have this problem too

Is this a good question?

Score 0
Add a comment

1 Answer

Putting the frame back for the camera is tricky since there are multiple connections, so you have to take careful note when disassembling the camera. Our disassemble guide can offer assistance for you in this task. Another thing is that the parts have become worn or broken, in this case you will have to replace the casing.

Was this answer helpful?

Score 0
Add a comment
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 173