The second generation of the iPad with Wi-Fi, GSM and CDMA models. Some models were refreshed before the iPad 3. Repair is difficult and requires heat and prying.

832 Questions View all

Replacing LCD on iPad 2

Hi I'm replacing LCD on my iPad 2 and it has a small anti dust foam gasket running all around it, which apparently does not come fitted to new LCD, does anyone know where I can buy one of these gaskets from? I have found some on Internet but all are wholesale only :(

Cheers,

Neil

Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment

2 Answers

Chosen Solution

The short answer is: you can skip that part.

But why did you need to change the screen to start with? Unless physically damaged, those LCD rarely fail. It is usually the LCD cable that needs reseating or replacing.

Was this answer helpful?

Score 1
Add a comment

hi rottenpunk,

the dust gasket u can buy on etradesupply.

i can not give u a link, cause the system will mark it at spam- this already happened.

etradesupply has a warehouse in the US.

i am in switzerland and order from the warehouse in china.

it's the best dust gasket i ever saw, cause it's comeing on a template.

just place the gasket over the lcd and push a little bit and take it off and thats it.

Was this answer helpful?

Score 0
Add a comment

Add your answer

rottenpunk will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 3

All Time: 145