Is it possible to re-attach a dislodged charging port on the main board. It seems to have come off the motherboard on a tablet. I can access the inside but don't know where to go after that.
Is this a good question?
Rep: 1.7k
14
8
6
You would have to realign all the connectors and then solder it back in place but yes it is possible
Was this answer helpful?
Is there a special solder gun for this? The one I have may be too large for detailed soldering.
The connectors are very small and very close to each other.
I don't know what kind of soldering gun you have but some have interchangeable tips. If your tip is fixed you'll need to find a fine tip gun so you dont further damage the motherboard
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 0
All Time: 70
2 Comments
Titu, most of the time it can be resoldered. In your case, since you did not tell us which tablet etc. we can only guess.
by oldturkey03
It's a Chromo 7" Android tablet
by Titu