Skip to main content

Third generation of iPad with Wi-Fi, released on March 16, 2012. Model Number A1416. Repair requires heating and careful prying.

154 Questions View all

White screen following digitizer repair

I recently purchased a digitizer repair kit for an ipad 3(screen, tools and adhesive). The LCD screen worked fine underneath, even the digitizer worked but it was badly cracked.

I carefully took off the old digitizer, disconnected the LCD screen , put in the new digitizer and reconnected the LCD screen.

the ipad now only shows a bright white screen. i checked the connection for the LCD screen and the digitizer and everything is connected fully. i tried a reset by pressing home key and power on/off button, but it just goes from white to blank to white again? i'm not even seeing the apple icon.

anyone know what i should do?

Answer this question I have this problem too

Is this a good question?

Score 0
Add a comment

2 Answers

I am facing exactly same issue. Is your problem solved? Let me know if you figured out the solution.

Was this answer helpful?

Score 0
Add a comment

Was there any resolution to this white screen? I have the same problem except I have series of thin lines from the home button to the camera eye. Let me know. Thanks.

Was this answer helpful?

Score 0
Add a comment

Add your answer

jerry will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 3

All Time: 171