Revamped version of the iPhone 3G with faster processing speeds. Repair of this device is similar to the 3G, and requires simple screwdrivers and prying tools. Model A1303 / 16 or 32 GB capacity / black or white plastic back.

1946 Questions View all

No backlight after complete Touch/LCD replacement?

I repaired an iPhone using a complete Touch/LCD and the phone seems to work except for the backlight. As there is only three cables from the screen to the rest I wonder which one of these that powers the backlight?

Second question could of course be - is there any risk that I damage something else during the process that could effect the backlight?

Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment

2 Answers

Chosen Solution

hi peter, i edited your post - i think that "LSD replacement" is something different ;-)

the backlight and the lcd are powered by the same connector (1)

to the second question:

did you remove the battery while installing the lcd ?

if not, sure - it's possible that you shorted something

i only see 3 possible faults:

  1. the connector isn't plugged in correctly
  2. the backlight of the lcd does not work
  3. the coil for the backlight died while the connector shorted the contacts

Was this answer helpful?

Score 2

Comments:

Where is the "coil for the backlight"?

by

I think you mean that coil and fix?

http://img686.imageshack.us/img686/9351/...

by

Add a comment

If your iphone screen was working (backlight) prior to screen change then a short has occured and the coil is fried. Check out 'backlight coil replacement 3gs' (and other combinations) on ebay -there are guys who will fix your phone for £20.

Was this answer helpful?

Score 0
Add a comment

Add your answer

Peter Karlberg will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 27,104