Fix Your Stuff Community Store

Fourth generation iPhone. Repair is straightforward, but the front glass and LCD must be replaced as a unit. GSM / 8, 16, or 32 GB capacity / Model A1332 / Black and White. This page aims to help users troubleshoot, fix, and seek help for the iPhone 4.

2375 Questions View all
Question Closed

Options

iPhone flickers after LCD replacement

Hi, yesterday I replaced my LCD/Digitizer. Now it blinks a little, just in the borders of the screen and it seems that it occurs only when I turn the screen on and it stops a few seconds later. Any idea?

Thanks

Answered! View the answer I have this problem too

Is this a good question?

Yes No
Score 0
Add a comment

1 Answer

Filter by:
Most Helpful Newest Oldest
Chosen Solution

Options

Hi, it could be just the screen replacement itself. Often they are cheap copies of genuine products and simply do not quite cut the mustard! If all is working well and you can put up with it, carry on; if not try opening up the device again to check connectors/seals etc and possibly look to try a known working screen in your phone to help rule out any other possibilities causing the issue.

Was this answer helpful?

Yes No
Score 0

1 Comment:

Thanks for the reply, I'll risk and try another screen so I can check if the problem is with the new screen or some connector.

by

Add a comment
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 152