The Kenmore 110 Series is an easy to use home Washing machine created by Kenmore.

255 Questions View all

The top lid wont lock

the top lid wont lock

Answer this question I have this problem too

Is this a good question?

Score 1
Add a comment
Deck the Halls
With tools and Fix Kits

1 Answer

Door or Lid Latch Assembly

If the washer lid or door won't lock the lock and switch assembly might be defective. This is a very common problem. The lock and switch assembly can fail either mechanically or electrically. Test any electrical switches with an Ohm meter for continuity. The switches should have continuity according to their design.

Door Lock Motor and Switch Assembly

If the washer lid or door won't lock the lock and switch assembly might be defective. This is a very common problem. The lock and switch assembly can fail either mechanically or electrically. Test any electrical switches with an Ohm meter for continuity. The switches should have continuity according to their design.

Door Lock

If the door won't latch, the door lock assembly might be defective. These are normally made of plastic and cannot be repaired. If the door won't latch and the door lock is broken, replace it.

Main Control Board

If the washer door won't unlock the problem might be the main control board. This is not common. Normally the problem is with the lock mechanism.

Was this answer helpful?

Score 0
Add a comment

Add your answer

minney will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 9

All Time: 597