Model A1502 / 2.4, 2.6, or 2.8 GHz dual-core Intel processor / Released October 2013

256 Questions View all

Where are the power-on jumpers on a mid-2013 MacBook Pro logic board?

PLEASE HELP TO LOCATE THE POWER JUMPER ON A MACBOOK 2013 13" Retina DISPLAY

--------------------------------------------------------------------------------

Where are the power-on jumpers on a mid-2013 MacBook Pro logic board?

--------------------------------------------------------------------------------

I'm trying to locate the power-on jumpers on the logic board of Early-2013 13" MacBook Pro

Retina Display.

I have disassembled and cleaned all components after I had a liquid spill on the KB, I found out the liquid spill didn't have enough time to reach the logic board and computer seems to be charging ok. I suspect the keyboard is damaged but want to start computer to run a systems check.

Answer this question I have this problem too

Is this a good question?

Score 1
Add a comment

1 Answer

vlajimmy jean, most of the newer models do not use jumper pads. You have to shorten two contacts on the keyboard connector. Lets see if we can find out which ones. It should be connector 5 shortened to ground.

Was this answer helpful?

Score 0

Comments:

Thanks for your reply.

I dont want to mess up the logic board, do you have a picture or smtg that can show me more details about how to do it.

Thank You Very Much.

by

Add a comment

Add your answer

vlajimmy jean will be eternally grateful.
View Statistics:

Past 24 Hours: 1

Past 7 Days: 3

Past 30 Days: 7

All Time: 683