Rep: 13
1
Hi,
I was replacing my optical drive with an SSD but when I was disconnecting the subwoofer connector from the logic board it broke :(
One of the four pin of the connector came off so I can't solder it on the motherboard again.
Can anyone tell me the name of that connector so maybe i can buy it and re-solder it on the motherboard.
Thank you
Is this a good question?
Rep: 782.7k
1.1k
893
2.3k
alessiorossotti, that connector is a Molex 78171-0004. It is available at places like this. More information about the connector can be found on here. Hope this helps, good luck.
Was this answer helpful?
Found the part at digikey.com They sell this connector in one (1) unit up to a full roll of 4500 units. Very helpful!!
Rep: 13
2
Have the same issue...but the whole connector came off. My macbook pro is not starting. Can I troubleshoot it that way? Won't start even in safe mode...
Was this answer helpful?
Best to create your own question with your system info as well posting a few pics so we can see the damage. This is a very old question.
Past 24 Hours: 2
Past 7 Days: 2
Past 30 Days: 3
All Time: 447
1 Comment
alessiorossotti, give us your computers serial number. This will help us to identify which logic board you have and then possibly to identify the right connector.
by oldturkey03