Rep: 23
2
There are some burned connectors on the board in the picture it says J2600 the connectors are close to the memory slot.
MacBook Pro 17" model MacBookPro 6.1 i7
Is this a good question?
Rep: 784k
1.1k
894
2.3k
Daniel Nanboe, reference designator J2600 is the Calpella Processor mini XDP connector. It is part of the eXtended Debug Port (XDP). Hope this helps, good luck.
Was this answer helpful?
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 1
All Time: 224
2 Comments
To properly identify your computer, the last three digits of your serial number would help a lot. From the bit of information that you did give us, it looks like these are the specs for your computer:"Intro Date: April 13, 2010 Disc Date: February 24, 2011 Order No: MC024LL/A Model No: A1297 (EMC 2352*) Subfamily: Mid-2010 17" Model ID: MacBookPro6,1 Std RAM: 4 GB Std VRAM: 512 MB* Std Storage: 500 GB (5400 RPM) Std Optical: 8X DL "SuperDrive"" Let us know if this is correct so we can properly determine what logic board your computer is using.
by oldturkey03
The last 3 digits from the serial number are DC7C. The computer is
Model: - MacBook Pro (17-inch Mid 2010) (CTO)
Codename: - No codename assigned.
Build Country: - This unit was built in China
Build Year: - This unit was built in the first half of 2010.
Build Week - Week 26 (June)
Production Nr.: - This unit was number 437 to be built that week.
by Daniel Nanboe