Rep: 13
1
Hi there. Am looking for the Omron 32way SMT header that the LCD display connects to on the logic board of a Gen 5.5 iPod Video. Omrons website suggest they don't even make one, or if they do it's manufactured under license directly to Apple. Don't see the point in paying for a new logic board when the problem is with a $2.00 header :) Thanks!
Is this a good question?
Rep: 35.1k
140
71
53
I don't think that you will find this part, the next thing is to install it - the broadcom chip next to the connector looks "glued" - there is an underfilling to prevent the bga's from breaking (never really works - but thats a different story)
so if you going to install the new connector the chip will get destroyed.
what happend to the connector of your iPod ?
Was this answer helpful?
Installing would be fairly straightforward. Have got the tools here for doing it )and a very steady hand) that would prevent any damage to the surrounding ICs. Just can't find a source for the header :(
The backlock snapped when the LCD display cable was being removed, so no way of being able to make a reliable electrical contact between the contact pins and the cable. Might have to find a dead logic board and try heating the part from the other side of the PCB to stop the header from melting.
ok, if you have the tools to do it - why not.
but as i said - watch out for the ic's with the underfilling
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 0
All Time: 716
