Skip to main content

Fix Your Stuff

Right to Repair


Released June 2009 / 2.66, 2.8, or 3.06 GHz Core 2 Duo Processor

361 Questions View all

sound not working after reassembling

Hi, I recently purchased some tools from you to replace my macs dc connector. Everything went ok, but I have lost the audio. Can you tell me which connector to check to make sure I plugged it in good? Thanks

Answered! View the answer I have this problem too

Is this a good question?

Score 1
Add a comment

1 Answer

Chosen Solution

I would attempt to reset the PRAM (hold command + option + P + R while powering on until you've heard it chime twice).

If that didn't work I would reset the SMC

  • Make sure your Mac is connected to power and turned off
  • Press and hold the left Shift + Control + Option buttons while pressing the power button for 5 seconds
  • Let go of all the keys & button
  • Attempt to power on after waiting 2-3 seconds

If it still had no sound then I would check the subwoofer cable and the left speaker cable

Hopefully one of those steps fixes it for you!

Was this answer helpful?

Score 0
Add a comment

Add your answer

canillas will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 87