Revamped version of the iPhone 3G with faster processing speeds. Repair of this device is similar to the 3G, and requires simple screwdrivers and prying tools. Model A1303 / 16 or 32 GB capacity / black or white plastic back.

1958 Questions View all

iPhone 3GS antenna orientation

Hi. Could someone please tell me which way round I need to install the 3gs (connector 7) antenna socket. Does the center pin flow towards the inductors or to the outside of the motherboard?


Answered! View the answer I have this problem too

Is this a good question?

Score 0


You are a star. Thank you :)


Add a comment

1 Answer

Chosen Solution

Jaywn, I suppose you are looking into replacing the actual connector. That would be J4_RF, a Murata MM4829_2700 connector. The datasheet for the connector is available right here. This will show you the hot and ground terminals. Then connect it according to the schematic, "Center pin" toward the inductor. Hope this helps, good luck.

Block Image

Was this answer helpful?

Score 0
Add a comment

Add your answer

Jaywn will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 148