Fourth generation iPhone. Repair is straightforward, but the front glass and LCD must be replaced as a unit. GSM / 8, 16, or 32 GB capacity / Model A1332 / Black and White.

3197 Questions View all

Logic board, battery connector problem

Is this fixable without jump wires?

https://plus.google.com/app/basic/stream...

Block Image

Answered! View the answer I have this problem too

Is this a good question?

Score 0

Comments:

Matthew, try and post an image that is a little better focused and a little less. Right now I would say, No, you will have to run jumpers since it appears as if your solder pads are of the logic board. A better picture will hopefully prove me wrong. Follow this guide to attach the images. I allowed myself to post your image with your question. Not everyone has access to an open network at all time and some may have trouble checking on your link :-)

by

Add a comment

1 Answer

Chosen Solution

You're solder pads are most definatly off and there is no way to fix other than jumper wires. Sorry and goodluck!

Was this answer helpful?

Score 0
Add a comment

Add your answer

Matthew will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 343