Rep: 813
6
5
1
can anyone ID this contact that rusted off of a iphone 4 at&t 16 gb that i bought? it had water damage and i am unsure of how to repair it, what the replacement part is, and where I can buy it a refer to the photo please for help. if you look at step #19 on the iPhone 4 teardown it shows it and where it goes in the phone.
Is this a good question?
Rep: 6.1k
15
20
5
hi gary, first off all you have bought an iphone 4S! iphone 4 has a A4 prossesor unlike your A5.
i have no idea what part you are talking about and i cant see a thing at step #19 on the iPhone 4 teardown. :-)
as you can see there is no part where you are pointing at.
Was this answer helpful?
the part that Gary is looking at is SP1_RF 1.0X1.85MM SM-NSP-OBLONG, the grounding spring for the antenna
Thanks,
I will fix, but the part i need was where the tip of the tweezers points to, i, opened the phone(it had water damage) and there was just a touch of rust or corrosion there, the part was gone. So the blank area in the square where the point of the tip ends, is where the part went. Thanks for the help.,
Gary
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 1
All Time: 155
2 Comments
Thanks for taking the time to help me Ole Turkey, Your a gentleman and a scholar.
Gary
by Gary
Oh,
I willfix,
What i am referring to in step # 19 is, There is a warning over on the right side of the page, it says be careful removing the Logicboard or you will damage the gold contact.(or something similar) it is the gold contact that is the part I need that they are saying to be careful not to damage. They just don't call it by it's actual name.
by Gary