my ipod touch had been working perfect but I cracked the screen. when I replaced the screen I can no longer get anything. it will not power up even after trying a hard reset as well as plugging into my computer to try a reset with iTunes. computer does not even recognize it. What do I do?
Is this a good question?
Rep: 31
2
Did you try the reset methods?
(home,sleep/wake or home,volume up, sleep/wake)
I picked a solution somewhere of the internet, but I can's find it anymore.
There is a very tiny part that should be transferred from the old (faulty) screen.
It sits on the back of the digitizer connector and looks like a rolled up piece of aluminium tissue.
Its glued and when you pry it of the connector you can stick it on the back of the new screens digitizer connector.
I tried it and it worked for me.
Was this answer helpful?
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 0
All Time: 292
2 Comments
Do you have a white screen?
by Rico
yes it is a white ipod touch 4th gen. and I have tried a few different screens getting the same no response.
by Joe