Fix Your Stuff Community Store

Model A1312 / Mid 2010 / 3.2 GHz Core i3 or 2.8 & 3.6 GHz Core i5 or 2.93 GHz Core i7, ID iMac11,3

382 Questions View all
Question Closed

Options

lcd issues turning the computer off

replaced my imac 27 lcd screen which works fine. I can see the screen fine till i put the screws back on the side to put the lcd in the case and the computer turns off and will not start again, I then take the back out and pull the plug out the back then then re put the plug back in and take the screws out and it work fine till i tighten the screws back up again???

any help would be great

Answer this question I have this problem too

Is this a good question?

Yes No
Score 0
Add a comment

1 Answer

Filter by:
Most Helpful Newest Oldest

Options

there should be black tape on certain places of the back of LCD panel. are you sure it is on all places as on the bad LCD? because the back of LCD is metal and can short something on the PSU or logic board

Was this answer helpful?

Yes No
Score 0
Add a comment
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 310