Won't turn on after screen was changed.
I changed the screen and the touch slide won't slide.
Is this a good question?
I changed the screen and the touch slide won't slide.
Is this a good question?
One of the 3 cables probably isn't inserted right. If I remember right, one cable was for the digitizer, other for the lcd, and proximity sensor. My guess would be that the digitizer cable wasn't inserted properly (it pops out easy went re assembling the phone.
But you could always try a hard reset home+power for 10 seconds and see if that helps
Was this answer helpful?
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 0
All Time: 2,300