Fourth generation iPhone. Repair is straightforward, but the front glass and LCD must be replaced as a unit. GSM / 8, 16, or 32 GB capacity / Model A1332 / Black and White.

3180 Questions View all

iPhone4 bettery connector soldering

Hi,

As you can see, the first image below is the batterty connector on the iphone motherboard.(You can notice those 2 squre solderings are gone)

Block Image

the second image is the actual battery connector that you plug in iphone bettery to this connector.

Block Image

the third image is what it looks like when the connector is attached to the motherboard.

Block Image

My question is, I don't know anything about soldering. I only know how to solder. so can I just solder those 4 pins and would I able to use the bettery normally again.

Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment

2 Answers

Chosen Solution

You can, But I would use a hot air rework station for a job like that. soldering is good for wires and such not really for SMD jobs.

Hope this helped.

Was this answer helpful?

Score 1
Add a comment

You need to reSolder the good pins and Crete a jumper from the connector to the gold tabs Just in front of the two that are missing. The one on the right can be grounded to th metal cage around circuit board if it is bad. The left is the hot side and it is a little more difficult to repair.

Was this answer helpful?

Score 0
Add a comment

Add your answer

John will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 2

All Time: 482