I replaced the iPod screen usually are put enchergo oq have it if I'm in a very good luminado, and I still have trouble seeing, she is dull, already increased the brightness at maximum, however the ipod does not change anything. what do you? Thanks
Is this a good question?
Rep: 782.4k
1.1k
893
2.3k
cassiolutk, if your screen is still dark, and only visible when illuminated from an outside source, it is your backlight. It is possible that you have a bad LCD, even so you just replaced it. Check the connector on the circuit board for corrosion. Check inside the connector. Clean the circuit board thouroughly with isopropyl alcohol. If that does not resolve it, the backlight circuit on your logic board has failed. You could check for a bad backlight coil/IC or replace the board. Hope this helps, good luck.
Was this answer helpful?
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 0
All Time: 714
