iPod Touch 4th Generation

Model No. A1367 / 8, 16, 32, or 64 GB capacity

1131 Questions View all

How should I put LCD anf digitizer together?

I broke my old ipod touch screen and I have managed to seperate the broken screen and I ordered new lcd and digitizer.

However unlike most of the pre assemblef screen, what I ordered is lcd and digitizer coming seperately, not put together.

I am worried that if i make a mistake in joining them together th touch moght work incorrectly and so on.

So the question is , is there any directions to do it?

THanks in advance.

Answer this question I have this problem too

Is this a good question?

Score 0
Add a comment

1 Answer

Most Helpful Answer

I have had luck with this issue by installing double sided tape to the back of the lcd and installing it onto the mid plate before putting glass down on the frame. I also install strips of double sided tape on the edges of the lcd and frame to prevent the glass from "kissing" the lcd.

Was this answer helpful?

Score 1
Add a comment

Add your answer

WonSuk Jang will be eternally grateful.

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 231